WATCH FIRMMarker Road Marker Adhesive Be Applied (In Bulk)

Two-part epoxy adhesive used to affix delineators

The following demonstration shows how FIRMMarker is applied to bond delineators to a...

Inside Our Kent, Washington (WA) Paint Service Center

Industrial paint tailored to the needs of Washington manufacturers 

FORREST's industrial paint and coatings service center in Kent,...

HIGHBALL® Tree Marking Paint - From Rudd to FORREST

Rudd Tree & Log Marking Paint is now HIGHBALL® Tree Marking Paint

Rudd's tree marking paint is now manufactured and distributed by FORREST 

Introducing: INFERNEX® LB-1100 High Temp Baking Enamel

Qualified by an international agricultural equipment manufacturer for use on exhaust system components

INFERNEX® LB-1100 High Temp Baking...

WATCH FIRMMarker Road Marker Adhesive Be Applied (In Bulk)

Two-part epoxy adhesive used to affix delineators

The following demonstration shows how FIRMMarker is applied to bond delineators to a...

Inside Our Kent, Washington (WA) Paint Service Center

Industrial paint tailored to the needs of Washington manufacturers 

FORREST's industrial paint and coatings service center in Kent,...

HIGHBALL® Tree Marking Paint - From Rudd to FORREST

Rudd Tree & Log Marking Paint is now HIGHBALL® Tree Marking Paint

Rudd's tree marking paint is now manufactured and distributed by FORREST 

Introducing: INFERNEX® LB-1100 High Temp Baking Enamel

Qualified by an international agricultural equipment manufacturer for use on exhaust system components

INFERNEX® LB-1100 High Temp Baking...

No

WATCH FIRMMarker Road Marker Adhesive Be Applied (In Bulk)

Two-part epoxy adhesive used to affix delineators

The following demonstration shows how FIRMMarker is applied to bond delineators to a concrete traffic strip

This demonstration of FIRMMarker shows transportation maintenance workers applying the two-part epoxy by the bulk application method. In bulk, FIRMMarker can be purchased in quarts, gallons, or five gallon quantities. FIRMMarker is also available in two 10oz cartridges that are designed to be used with the double-barrel caulking gun to combine the two parts at the moment of application. This video was produced by Adhesive Systems Technology Corporation, a designer and manufacturer of industrial adhesive and sealant application equipment. 

FIRMMarker is an AASHTO M237 Type II Epoxy Adhesive. It is used as a specified product for road maintenance in several US states including OR, CA, WA (WSDOT Spec 9-26.2), and FL among others. Formerly known as QCM Road Marker Epoxy.

Visit the FIRMMarker Product Page Here or get in touch for more information about this product and other transportation epoxy adhesives.

Contact Us For More Info

 

Watch the original video on AST Corporation's YouTube channel here:

 

Ready to find the right coating for you?

speak to a Coatings expert 1-800-537-7201